-
-
Main Business
-
-
-
PRODUCTS
Xintianhe Resin
Thermosetting Resins
Product grade
Categorization
Viscosity(mPa.s 25℃)
Gel time(min)
Heat distortion temperature(℃)
Tensile strength(MPa)
Elongation at break(%)
Impact toughness(KJ/㎡)
Application
Categorization
Viscosity(mPa.s 25℃)
Gel time(min)
Heat distortion temperature(℃)
Tensile strength(MPa)
Elongation at break(%)
Impact toughness(KJ/㎡)
Application
Categorization
Viscosity(mPa.s 25℃)
Gel time(min)
Heat distortion temperature(℃)
Tensile strength(MPa)
Elongation at break(%)
Impact toughness(KJ/㎡)
Application
Categorization
Viscosity(mPa.s 25℃)
Gel time(min)
Heat distortion temperature(℃)
Tensile strength(MPa)
Elongation at break(%)
Impact toughness(KJ/㎡)
Application
Categorization
Viscosity(mPa.s 25℃)
Gel time(min)
Heat distortion temperature(℃)
Tensile strength(MPa)
Elongation at break(%)
Impact toughness(KJ/㎡)
Application
Categorization
Viscosity(mPa.s 25℃)
Gel time(min)
Heat distortion temperature(℃)
Tensile strength(MPa)
Elongation at break(%)
Impact toughness(KJ/㎡)
Application
Categorization
Viscosity(mPa.s 25℃)
Gel time(min)
Heat distortion temperature(℃)
Tensile strength(MPa)
Elongation at break(%)
Impact toughness(KJ/㎡)
Application
Categorization
Viscosity(mPa.s 25℃)
Gel time(min)
Heat distortion temperature(℃)
Tensile strength(MPa)
Elongation at break(%)
Impact toughness(KJ/㎡)
Application
Categorization
Viscosity(mPa.s 25℃)
Gel time(min)
Heat distortion temperature(℃)
Tensile strength(MPa)
Elongation at break(%)
Impact toughness(KJ/㎡)
Application
Categorization
Viscosity(mPa.s 25℃)
Gel time(min)
Heat distortion temperature(℃)
Tensile strength(MPa)
Elongation at break(%)
Impact toughness(KJ/㎡)
Application
Categorization
Viscosity(mPa.s 25℃)
Gel time(min)
Heat distortion temperature(℃)
Tensile strength(MPa)
Elongation at break(%)
Impact toughness(KJ/㎡)
Application
Categorization
Viscosity(mPa.s 25℃)
Gel time(min)
Heat distortion temperature(℃)
Tensile strength(MPa)
Elongation at break(%)
Impact toughness(KJ/㎡)
Application
Categorization
Viscosity(mPa.s 25℃)
Gel time(min)
Heat distortion temperature(℃)
Tensile strength(MPa)
Elongation at break(%)
Impact toughness(KJ/㎡)
Application
Categorization
Viscosity(mPa.s 25℃)
Gel time(min)
Heat distortion temperature(℃)
Tensile strength(MPa)
Elongation at break(%)
Impact toughness(KJ/㎡)
Application
Categorization
Viscosity(mPa.s 25℃)
Gel time(min)
Heat distortion temperature(℃)
Tensile strength(MPa)
Elongation at break(%)
Impact toughness(KJ/㎡)
Application
Categorization
Viscosity(mPa.s 25℃)
Gel time(min)
Heat distortion temperature(℃)
Tensile strength(MPa)
Elongation at break(%)
Impact toughness(KJ/㎡)
Application
Categorization
Viscosity(mPa.s 25℃)
Gel time(min)
Heat distortion temperature(℃)
Tensile strength(MPa)
Elongation at break(%)
Impact toughness(KJ/㎡)
Application
Categorization
Viscosity(mPa.s 25℃)
Gel time(min)
Heat distortion temperature(℃)
Tensile strength(MPa)
Elongation at break(%)
Impact toughness(KJ/㎡)
Application
Categorization
Viscosity(mPa.s 25℃)
Gel time(min)
Heat distortion temperature(℃)
Tensile strength(MPa)
Elongation at break(%)
Impact toughness(KJ/㎡)
Application
Categorization
Viscosity(mPa.s 25℃)
Gel time(min)
Heat distortion temperature(℃)
Tensile strength(MPa)
Elongation at break(%)
Impact toughness(KJ/㎡)
Application
Phthalic type
1400-1600
6-8
110
65
3.0
8
BMC special resin has high elongation at break and good impact toughness. It is suitable for various structural components.
Benzene type
2100-2300
7-9
130
60
2.5
8
BMC special resin, high cost-performance ratio, good weather resistance, high gloss, and low shrinkage rate. Suitable for various high-demand molded products.
Cresol type
2100-2300
6-8
110
60
5.0
10
BMC special resin, low cost, good coloring ability, high elongation at break, and good impact toughness. Suitable for products such as manhole covers and water pipes.
Cresol type
2100-2300
6-8
110
60
5.0
10
BMC special resin, low cost, good coloring ability, high elongation at break, and good impact toughness. Suitable for molded products such as manhole covers and water tanks.
Phthalic type
1400-1600
8-10
120
65
2.5
10
SMC/BMC resin has high versatility, with slow thickening in the early stage and fast thickening in the later stage. It has high mechanical strength, good electrical performance, and relatively good gloss. It is suitable for various structural components.
Phthalic type
1400-1600
7-9
115
65
2.5
10
SMC/BMC resin, thickening and stabilizing, with high gloss and good toughness. Suitable for making large volume molded products.
Phthalic type
1400-1600
10-12
110
65
4.0
10
SMC/BMC resin, thickening and stabilizing, high cost-performance ratio, high mechanical strength, and very good toughness. Suitable for making large area molded products for surface painting.
Phthalic type
1300-1700
8-12
130
65
2.5
12
High reactivity, thickening stability, with advantages such as high gloss, high heat resistance, and high toughness. Widely applicable to the fields of automotive pressing, rail transportation, electrical components, construction facilities, and industrial and civilian equipment where there are high requirements for mechanical strength, electrical performance, toughness, glossiness, and shrinkage control in molded products.
Double ring
1000-1400
7-9
125
60
2.0
10
SMC/BMC uses dual-ring resin, which is thickened and stable, has good wettability, high hardness, and relatively good gloss. It is suitable for various molded structural parts.
Maleic type
2500-2700
10-12
210
50
2.0
7
It has characteristics such as high heat distortion temperature, resistance to boiling water, good high-temperature resistance, and excellent corrosion resistance. It has good wettability with fillers and glass fibers. It is suitable for wide addition to various molding process resins such as hand lay-up, winding, casting, pultrusion, and RTM, significantly improving the product's heat distortion temperature, high-temperature resistance, boiling water resistance, and corrosion resistance.
Phthalic type
1100-1300
7-9
130
65
3.0
10
SMC/BMC resin, thickening stability, high gloss, high strength, good toughness. Suitable for making various molded products.
Phthalic type
1400-1600
5-7
130
65
2.5
10
SMC/BMC resin, thickening stability, high mechanical strength, good toughness, high gloss, and low shrinkage rate. Suitable for making various high-performance structural molded products.
Phthalic type
600-800
5-7
140
55
2.0
7
SMC special resin, low viscosity, thickening stability, high gloss, good boiling water resistance and weather resistance. Suitable for making compression molded products with high brightness, high flatness, and high temperature resistance.
High activity
2500-2700
7-9
140
55
2.5
8
SMC/BMC resin, high viscosity, thickening stability, high reactivity, relatively high toughness, and high heat resistance. Suitable for making compression molded products with high brightness and high temperature resistance.
High activity
1800-2000
9-11
140
55
2.0
7
SMC/BMC resin, high viscosity, thickening stability, high reactivity, and good heat resistance. Suitable for molded products with A-level surface requirements.
isophthalic
800-1200
4-6
73
70
2.5
7.0
isophthalic unsaturated polyester resin, with medium viscosity and medium reactivity, the cured material has high hardness, excellent water resistance, and can be made of buttons that can withstand high temperature ironing.
isophthalic
900-1300
3-6
58
40
12
15
isophthalic unsaturated polyester resin features moderate viscosity and reactivity. It is widely used in high-end pearlescent sheet buttons and exhibits excellent impact resistance.
isophthalic
800-1200
3-6
63
55
5.0
12
isophthalic unsaturated polyester resin with medium viscosity and reactivity. It is widely used in high-grade pearlescent plate buttons, and has good heat resistance and impact resistance..
Isophthalic
800-1200
3-6
63
55
5.0
12
Isophthalic unsaturated polyester resin with medium viscosity and reactivity. It is widely used in high-grade pearlescent plate buttons, and has good heat resistance， light resistance and impact resistance
Phthalate
120-160
3-5
58
55
15.0
12.0
Pre-promoted resin for crafts that requires filler.
Note: If you need a detailed product manual or other information, please contact us.
Shanghai Xintianhe Resin Co., Ltd.
Address: Room 502, Building 23, Science and Technology Oasis, 1999 Yishan Road, Minhang District, Shanghai
National unified hotline: 400-820-9698
Telephone: 86-21-57485068 / +86 13917508287 (Sales Department)
E-mail: service@chinaresins.com
Concerned about the public.
day and resin
